Drill Machines are used for driving round holes in construction and building sites.

There are situations in which you can not use a general drill, such as tight spots or awkward angles.

That’s where a right-angle drill comes to the rescue. However, always check different aspects when selecting a right-angle cordless drill for work.

Some key aspects to check for include: the head size, torque, and Rotations per minute. Smaller head size, higher torque value, and RPM make the perfect right-hand drill.

You can also read right-angle drill reviews to learn about them in detail. Check our detailed guide about finding the best right angle drill guide here.

The top 7 Cordless Right Angle Drivers  are shared below to help you choose the best one for your project:

1.  Milwaukee’s M18

Milwaukee’s M18 line of tools is well renowned in the manufacturing industry. This 90-degree model lives up to the high user expectations. It comes equipped with 11 speeds and an electronic clutch to help you switch to the required one easily. With Milwaukee’s M18, you don’t have to worry about over-drilling.

Pros

  • It comes with a 5-year warranty card.
  • The 11-speed Motor adds to speed flexibility.
  • It contains a built-in LED light.
  • The head size is 3.75-inch that helps to drill in tight spaces.
  • Torque: 125 lbs-in.

Cons

  • It weighs 8.1 lbs which are quite heavy.
  • Keyed chuck dimensions are ⅜ – inch.

FAQs about Milwaukee’s M18

Q. What does Milwaukee’s M18 kit include?

A. The kit is complete with a battery, charger, and other essential items.

Q. Is it wrapped in a case?

Packaging materials vary, but it is commonly wrapped in a soft case.

Q: Can you use it to drill through hardwood?

A: Yes, of course. It has the power required to drill through hardwood.

Our Opinion

Milwaukee’s M18 90 drill is a great addition to your toolbox when it comes to drilling. It has all the required drill speeds to handle even the most fragile materials. Head size is small enough to pass through tight spaces. It has a built-in LED to make drill easy in closed and dark spaces.

The only concern is its heavyweight since drilling for long hours can become hectic with it.

Other than that, Milwaukee is a well-reputed brand and offers good warranties to satisfy its customer base.

2. Dewalt 20 volt max MAX Lithium-Ion Compact Driver DCD740C1

DeWalt drill is compact, portable, and has a lower torque. However, this can make drilling difficult when working with dense materials.

Pros

  • Offers a limited warranty of 3 years
  • Free service is available for a year
  • Weight 3.9 lbs
  • Battery 1.5 Ah
  • Head size 4 inches
  • Includes a built-in LED light
  • It offers dual-speed variations.

Cons

  • Torque is lower
  • Chuck loosens over time.

FAQs

Q: How much is the chuck size?

A: ⅜ inches. This is a common size in this category.

Q: Are larger DeWalt batteries compatible with this model?

A: Yes, it can use large batteries from the same brand.

Q: Can you use it to drill through a ceramic tile?

Yes, it is possible to drill holes in ceramic material.

Our Opinion

DeWalt DCD740C1 20-Volt MAX Driver is another good drill for getting the work done. However, please don’t use it for hard materials, as low torque can be frustrating. Some owners have reported difficulty with the chuck as it loosens over time and needs to be tightened to avoid issues.

Other than these issues, it is a great cordless right-angle drill machine. The warranty is solid, and the brand is well respected. You will be happy to add it to your set of tools.

3. Makita 18V LXT Li-Ion Cordless 3/8″ Angle Drill XAD02Z

Makita is famous for its high-end products, and this small right-angle drill is no exception. It enjoys a high rating with plenty of inspiring features. With a head size of around 3.5-inch, you can use it for drilling in narrow gaps, which is also the main focus of this device.

Pros

  • The chuck is keyless. Size is ⅜ inch.
  • It comes with a three-year warranty.
  • It has 1800 RPM
  • The motor used is a 4-pole

Cons

  • It cannot function with old batteries.

FAQs

Q: Where is this product manufactured?

A: Makita products are manufactured in Japan and are Japanese.

Q: Does it use a removable handle?

A: Yes. You can remove the handle when working in tight spaces.

Q: How much effort is needed to loosen the chuck?

A: You can do so with both hands—one for holding the chuck and the other to engage the motor.

Our opinion

Makita 18V LXT Angle Drill is a well-known name in the power tool industry. People love it for its small size and power. It helps to get most of the jobs done without any difficulty. It has a long warranty and long wearability. The only downside is the non-compatibility of the batteries. Lastly, this is the most powerful drill in this category.

4. Bosch 12-Volt Max Lithium-Ion Driver Kit PS10-2A

Bosch 12-Volt PS10-2A is a pocket-size model. It is ideal for reaching areas that all the other right-angle drills can not. It is the perfect portable drill for small and tight spaces.

Pros

  • The Head length is 3.5 inches.
  • Articulating head at 90 degree
  • Includes an electronic clutch
  • Chuck is easy to change

Cons

  • Torque value is 80 lbs-in

FAQs

Q: Is the trigger sensitive to control?

A: No, the current models don’t have this issue.

Q: Does it include a light?

A: No, it doesn’t include any light.

Q: Does it work with a Bosch 10.8V battery?

A: Yes, it is compatible with this battery.

Q: Are there any differences between this and the PS11-102 model?

They look similar, but PS10-2A is superior for its quick connect drill bits and nut drivers.

Our Opinion

It is one of the smallest drill models available in this category. The articulating head helps to work at awkward angles. It is good enough to execute everyday jobs even if it’s not powerful.

5. Hitachi 18 Volt Cordless Lithium-Ion 3/8-Inch DN18DSLP4

Hitachi is a brand that has almost every product covered under the technology niche. They ensure high-quality standards with long wearability. The same goes for this drill.

Pros

  • Offers a lifelong Warranty
  • Offers 1800 RPM max
  • 3.5-inch sized head

Cons

  • Torque is only 106 lbs-in
  • Batteries are not included in the kit
  • It weighs only 3.3 lbs without a battery

Faqs

Q: Is it a reversible model?

A: Yes, it is, based on settings.

Q: Does it work with batteries from the impact driver set?

A: Yes, they are compatible with the 18V set.

Q: Can you adjust the torque?

No, torque can’t be adjusted. However, you can adjust the speed.

Our opinion

Most drill users consider it a great cordless drill. It always gets the job done, and that too at a reasonable cost. It is a great addition to your Hitachi tool collection. It is compatible with existing batteries, so you don’t have to buy anything. It also includes LED lights and battery indicators. You can use this for drilling cabinet holes and other similar projects.

6. Ryobi One+ 18 Volt P241 Driver

Ryobi P241 is an amazing right-angle driver and deserves praise for its many features. However, the actual quality is only determined by putting it to use.

Pros

  • Long warranty stretching to 3 years
  • Three-month replacement warranty
  • Headline is 3.2-inch
  • Torque is 1450 lbs and 130 lbs-in

Cons

  • Weights 3.4 lbs without the batteries
  • Switches are non-ergonomic

Faqs:

Q: Does it include a warranty?

A: Yes, up to three years and a 90-day replacement warranty.

Q: What are the limitations?

A: For hard surfaces, you have to drill using both your hands. It doesn’t include any clutch for adjusting the slipping force. This can cause overdriven screws.

Q: Does this include a battery and charger?

A: Most of the models only include the device. You have to buy the accessories separately.

Our opinion

It has many positive features. Head size is the smallest in the category for drilling tight spaces. Torque is also good at 130 lbs with 1100 max RPM, which is helpful when drilling a hole or a screw. The warranty is long enough to have confidence in this product. It is priced under $100, which makes it affordable. However, buying separate compatible batteries and a charger can increase the price.

7. Makita 12V max Lithium-Ion Cordless 3/8″ Driver AD02W

Makita 12V is another ultra-right angle drill driver with a slip shape. However, it produces 100 lbs of torque at 800 Rotations per Minute. It is one of the smallest right-angle drills. It’s compact but is strong enough for getting jobs done.

Pros

  • Includes warranty of 3 years
  • Weighs 2.5 lbs Battery
  • Includes a built-in LED light
  • Produces 100 lbs torque
  • Head size 3.4 inches

Cons

  • Maximum RPMs are only 800.

Faqs

Q What is the chuck depth when inserting drill bits?

A: This depends on the bit ranging from 1 inch to 1.5 inches.

Q: What does the kit include?

A: It comes with a charge and two batteries for work.

Q: Can you use it with a 220V socket?

A: No, it’s compatible with 120V AC.

Our opinion

Makita 12V is another great drill by this brand. It is compact and precise. It is one of the smallest available devices in the market. It weighs only 2.5 lbs with a battery, making it very lightweight compared to its competitors.

The handle includes a soft rubber grip to make it comfortable to hold for long durations. However, the speed can only be stretched to 800 RPM with maximum torque to 100 lbs. This is the tool to get hold of if you are not concerned about speed and power.

Conclusion

It isn’t easy to choose the best right-angle drill as each of the drills shared above have their specifications and features. You can select the right angle drill based on your requirements.

FAQs About Right Angle Drills

Q1: Is a right angle drill worth it?

The 90-degree drills are functional and can get any DIY job done, including closed spaces such as plumbing. This is especially helpful for assembling cabinets or screwing floor joists as a typical drill does not reach these spaces.

Q2: Which is the best angle drill bit?

It depends on the materials. Steel and Stainless Steel use 135-degree bits. The shallow angle makes it possible to drill into the material without going fast. However, it would help if you drilled through the center for bits that require walking around. 135 angle is quite flat.

Q3: Do electricians use right-angle drills?

Yes, electricians use right-angle drills for working in tight spaces. That’s because these make the work easy due to a compact body and 90-degree drilling head.

Q4: What is the best-rated cordless drill?

The best-rated cordless drill is DCD740C1.